Great Planes RCTimer Page 2 Review

RCTimer

55G 9KG METAL GEARED STANDARD SERVO RC211

* Weight	A55g
*Size	41.0 x 20.1 x 38.0mm
*Operating Speed	0.16sec/60o
*Stall Torque	9 kg/cm
*Operating Voltage	5-7.2 Volts
Application	Great for gas or electric .20-1.20 size airplanes,

55g RCT0211MG Metal Geared Standard Servo *Model. RC0211MG Feature Metal ...

RCTimer

RC HOBBIES ESC 80A BRUSHLESS MOTOR SPEED CONTROLLER

- Throttle setting	auto or 1.1ms to 1.8ms

ESC 80A Brushless Motor Speed Controller • Compact 80 amp ...

RCTimer

RC HOBBIES ESC 70A BRUSHLESS MOTOR SPEED CONTROLLER

- Throttle setting	auto or 1.1ms to 1.8ms

ESC 70A Brushless Motor Speed Controller • Compact 70 amp ...

RCTimer

RC CAR QUIK ESC 30A BRUSHLESS MOTOR SPEED CONTROLLER

10)、Support 1 cell operation (min voltage	3V, only available for XC-6A and XC-10A).
· Input voltage	5V-13V (support 2-3 lithium batteries)
· Continue current	30A
· BEC output	2A /5V (linear)
· Size( length X width X high)	45x32x20 mm
· Weight	51 g
4)．Run Mode	One, Two, Two2. Default is Two2.
One	the car can go forward only, and brake continuously if push the throttle stick to backward zone.
5)．Start Force	20%,25%,30%,35%,40%. Default is 30%. It refers to the maximum force when the car start.
6)．Timing	low, middle ,high and highest. Default is middle. Low advance timing is recommended

1). OffVolt (Low voltage Protection threshold, Cutoff voltage): User can set proper cutoff voltageaccording to cell quantity in range of 00.0-49.9V, the default is 00.0V。, Note: System will detect battery cells and calculate proper threshold automatically if this setting is 00.0V, protection threshold for each Li-XX cell is 2.8V. For example: if the battery pack is 3 cells Li-xx, cutoff voltage will be: 2.8V*3=8.4V., 2)．Brake Force: 50%, 75%,100%. Default is 100%. The ESC provide proportional brake function. The brake forceis related to the position of the throttle stick. It refers to the maximum brake force when the throttle stick is pushed to the top point of the backward zone., 3)．Drag Brake: 0、5%,10%,15%,20%. Default is 0. When the throttle stick is located at the neutral zone,the ESC provide a slight brake force., Two: Bi-directional mode, the car go forward when the throttle stick is located at the forward zone,when the throttle stick is located at the backward zone, the car will go backward, the brake will occur when direction change., Two2: Conditional Bi-directional mode. With this option, the car go backward only when car is stop and throttle stick is pushed from neutral zone to backward zone. When car is running forward, push throttle stick to backward zone, car will keep brake until it stops, the throttle stick return the neutral zone, and push the throttle stick to the backward zone, then the car will go backward.,

1、Features 1)、Full protection feature including low voltage, over-heat, throttle signal ...